Lightweight AP – DHCP Configuration

Posted on May 24, 2011. Filed under: Uncategorized | Tags: , , , , |

Just some findings on lightweight access points, and configuration of DHCP pools.  DHCP is used to tell the LAPs what the wireless controller(s) ap-mgmt address is on boot up.

Option 60 is specified in  a DHCP discover packet by lightweight APs requesting an IP address, it’s used to tell the server what type of device it is, for example a client may set option 60 to ‘Cisco AP c1140’.

The DHCP server can be configured to provide additional options in a DHCP offer packet, only to those client’s that need it.  In this case, if option 60 is ‘Cisco AP c1140’, the server will return option 43, which has the address of the wlc ap-mgmt interface IP addresses in hex format.

ip dhcp pool ap_manager
# Identifies type of device
 option 60 ascii "Cisco AP c1140"
# Specifies IP of WLC controllers|
 option 43 hex f108c0a80a05c0a80a14
   lease 8

The hex value is made up as follows:

f1 = 0xf1 (type)
08= 0x8 (total number of octets in both IP addresses 2×4)
c0a80a05=192168105 (first IP)
c0a80a14=1921681020 (second IP)

It should be noted that there is a bug on 3750 switches running 12.2(46)SE which prevents option 60 from being specified. “% Invalid input detected at ‘^’ marker.”  is returned because there is a space in the text ‘Cisco AP c1140’.  To resolve this change to a different version of code.

Read Full Post | Make a Comment ( None so far )

Liked it here?
Why not try sites on the blogroll...